Actualités / Technique/Innovations

MPS introduces EFS and EFA Flexo press lines

MPS introduces EFS and EFA flexo press lines: “With a beautiful design, new colours and even more operator-friendly innovations, the EFS and EFA flexo presses are the next level that this market demands,” said Atze Bosma, CEO of MPS Systems.

MPS introduces EFS and EFA Flexo press lines

MPS introduces EFS and EFA flexo press lines: “With a beautiful design, new colours and even more operator-friendly innovations, the EFS and EFA flexo presses are the next level that this market demands,” said Atze Bosma, CEO of MPS Systems.

10 juillet 2019

SmartLam

Smartlam. Did you Know?
The SmartLam unit works by stretching the top layer between two nips. This means that the top layer must be made out of stretchable material, for example PE/PP. In order for the unit to work properly, the top web must be printed slightly shorter than the bottom web. By controlling the speed of the SmartLam nip it is possible to stretch the top layer into place.
E.g. by running the SmartLam nip at the same speed as the central nip, the top layer will be drifting since it was printed shorter than the bottom layer. Likewise, if we run the SmartLam nip slower than the central nip, we will stretch the top layer into the place. An algorithm calculates the needed speed difference, depending on the repeat length and how much shorter the top layer has been printed...

SmartLam

Smartlam. Did you Know?
The SmartLam unit works by stretching the top layer between two nips. This means that the top layer must be made out of stretchable material, for example PE/PP. In order for the unit to work properly, the top web must be printed slightly shorter than the bottom web. By controlling the speed of the SmartLam nip it is possible to stretch the top layer into place.
E.g. by running the SmartLam nip at the same speed as the central nip, the top layer will be drifting since it was printed shorter than the bottom layer. Likewise, if we run the SmartLam nip slower than the central nip, we will stretch the top layer into the place. An algorithm calculates the needed speed difference, depending on the repeat length and how much shorter the top layer has been printed...

28 juin 2019

Dorure à chaud

Hot stamping or foil stamping is a printing method of relief printing which pre-dried ink or foils are transferred to a surface at high temperatures. The non-polluting method has diversified since its rise to prominence in the 19th century to include a variety of colours and processes...

Dorure à chaud

Hot stamping or foil stamping is a printing method of relief printing which pre-dried ink or foils are transferred to a surface at high temperatures. The non-polluting method has diversified since its rise to prominence in the 19th century to include a variety of colours and processes...

3 juin 2019

Did you know?

GapMaster is the world’s leading system for setting gaps while machines are running. Based on an anvil cylinder, the system is used to adjust the gap between the anvil body and the magnetic or cutting cylinder in ultra-precise steps (the smallest step is 0.8 µm). This means that the machine operator can safely process materials with varying substrate thicknesses. The permanent high-precision setting reduces cutting tool wear and significantly extends tool life.
GM offers GapMaster to all existing diecutting machines.

Did you know?

GapMaster is the world’s leading system for setting gaps while machines are running. Based on an anvil cylinder, the system is used to adjust the gap between the anvil body and the magnetic or cutting cylinder in ultra-precise steps (the smallest step is 0.8 µm). This means that the machine operator can safely process materials with varying substrate thicknesses. The permanent high-precision setting reduces cutting tool wear and significantly extends tool life.
GM offers GapMaster to all existing diecutting machines.

30 juillet 2019